Sheet metal, especially iron. It is obtained by passing thick sheets between rollers.
Plate sheets are produced in thicknesses of 6mm-200mm. Their width is max. 3000 mm, their length is Max. 15000 mm. Process and product controls are carried out at every stage of production.
Flat steel products in the form of roll or sheet, produced by rolling hot rolled flat steels without heat treatment and whose thickness varies between 0,20-2,00 mm.
Black Sheets are flat steel products obtained by rolling the rectangular semi-product (SLAB) produced by continuous casting method to a certain temperature by rolling.
Galvanized sheet is produced by hot dipping method of low carbon cold and hot rolled coils by zinc coating according to the international standards demanded by the customer.
Tufal (oxide) formed on Hot Rolled Coil surfaces is cleaned by hydrochloric acid or sulfuric acid baths and lubricated with protective oil to prevent re-oxidation.
Tufal (oxide) formed on Hot Rolled Coil surfaces is cleaned by hydrochloric acid or sulfuric acid baths and lubricated with protective oil to prevent re-oxidation.
: It has a tear pattern in the mold after it is drawn from the hot rolled sheet. Checkered sheet metal, which is mostly used in decorative areas, is used in many structures.
Our company sells widened metal, which has a lot of usage all over the world but is not very well known in our country. This product has many physical and cost advantages besides a wide range of uses.
The 27/200 form of the galvanized single layer products is called trapezoidal sheet.
CK 45 Sheets
Thanks to the combination of High Hardness, High Strength and superior toughness, Hardox® wear plate is the first choice in applications where wear has previously been a problem.
